Mazda 6 Service Manual: Washer fluid-level sensor inspection
1. Disconnect the negative battery cable.
2. Remove the washer tank. (See WASHER TANK REMOVAL/INSTALLATION)
3. Insoect for continuity between the washer fluid-level sensor terminals using an ohmmeter.
4. Verify that the windshield washer motor operates.
- If not as specified, replace the washer fluid-level sensor.
Washer fluid-level sensor removal/installation
1. Disconnect the negative battery cable.
2. Remove the washer tank. (See WASHER TANK REMOVAL/INSTALLATION)
3. Remove the headlight cleaner motor. (See HEADLIGHT CLEANER MOTOR
REMOVAL/INSTALLATION ...
Windshield washer nozzle removal/installation
1. Remove the bonnet insulator.
2. Remove the windshield washer hose from the windshield washer nozzle.
3. Compress the hooks of the windshield washer nozzle.
4. Pull the windshield washer nozzle o ...
Other materials:
Mazda 6 Service Manual: Sas unit removal/installation
Warning
Handling the SAS unit improperly can accidentally deploy the air
bag modules and pre-tensioner seat belt, which may seriously injure you.
Read AIR BAG SYSTEM SERVICE WARNINGS before handling the SAS unit. (See
SERVICE WARNINGS.)
Caution
When replacing the SAS unit, config ...
Mazda 6 Service Manual: Checking Tire Pressure
1. When you check the air pressure, make sure the tires are cold —meaning they
are not hot from driving even a mile.
2. Remove the cap from the valve on one tire.
3. Firmly press a tire gauge onto the valve.
4. Add air to achieve recommended air pressure.
5. If you overfill the tire, release ...