Mazda 6 Service Manual: Wheel alignment

General procedures

PRECAUTION (SUSPENSION) Wheels and Tires Removal/Installation When a wheel is installed, tighten it to 88-118 N·m {9.0-12.0 kgf·m, 65.0-87.0 ft·lbf}. Suspension Links Removal/Installation Tig ...

Wheel alignment pre-inspection

1. Inspect the tire inflation, and adjust to the recommended pressure as necessary. 2. Inspect the front wheel bearing play and correct it if necessary. (See Wheel Bearing Play Inspection.) 3. I ...

Other materials:

Mazda 6 Service Manual: Main fuse removal/installation
1. Disconnect the negative battery cable. 2. Remove the main fuse block cover. 3. Remove in the order indicated in the table. 4. Install in the reverse order of removal. Bolt Removal Note 1. Press and remove the tabs on the main fuse block at the positions indicated by the arrows. 2. L ...

Mazda 6 Service Manual: Cargo compartment light switch inspection
1. Remove the liftgate lower trim. (See LIFTGATE LOWER TRIM REMOVAL/INSTALLATION) 2. Disconnect the cargo compartment light switch connector. 3. Inspect for continuity between the cargo compartment light switch terminals using an ohmmeter. If not as specified, replace the liftgate lock. ...