Mazda 6 Service Manual: Wiper and washer

Panel light control switch inspection

1. Connect the connector to the panel light control switch. 2. Connect the negative battery cable. 3. Measure the voltage at the panel light control switch using voltmeter. When inspecting termi ...

Windshield wiper motor removal/installation

1. Disconnect the negative battery cable. 2. Remove the windshield wiper arm and blade. (See WINDSHIELD WIPER ARM AND BLADE REMOVAL/INSTALLATION.) 3. Remove the cowl grille. (See COWL GRILLE REMOV ...

Other materials:

Mazda 6 Service Manual: Wheel alignment pre-inspection
1. Inspect the tire inflation, and adjust to the recommended pressure as necessary. 2. Inspect the front wheel bearing play and correct it if necessary. (See Wheel Bearing Play Inspection.) 3. Inspect the wheel and tire runouts. (See SUSPENSION.) 4. Inspect the ball joints and steering linkag ...

Mazda 6 Service Manual: Rear window glass removal
1. For the 4SD, remove the following parts: (1) Remove the headliner. (2) Remove the rear package trim. 2. For the 5HB, remove the following parts. (1) Remove the rear wiper arm and blade. (2) Remove the liftgate lower trim. 3. Apply protective tape along the edge of the body to pr ...