Mazda 6 Owners Manual: Fully Automatic Type
Climate control information is displayed on the display.
- Control Switches
- Operation of Automatic Air-conditioning
- Windshield Defrosting and Defogging
- Sunlight/Temperature Sensor
Dehumidifying (With air conditioner)
Operate the air conditioner in cool or cold weather to help defog the windshield
and side windows.
1. Set the mode selector dial to the desired position.
2. Set the air intake selector to the outs ...
Control Switches
AUTO switch
By pressing the AUTO switch the following functions will be automatically controlled
in accordance with the selected set temperature:
Airflow temperature
Amount of airflow
Selec ...
Other materials:
Mazda 6 Owners Manual: Filament repair
1. Use isopropyl alcohol to clean around the damaged section of the filament.
2. Attach tape above and below the damaged section of the filament.
3. Using a small brush or marking pen, repair the filament with silver paint
or equivalent.
4. After 2-3 minutes, carefully remove the tape without ...
Mazda 6 Owners Manual: A-pillar trim removal
1. Turn the seaming welt over.
2. Disengage clips A using a fastener remover.
3. Pull the A-pillar trim, then disengage clip B (1).
4. Pull the A-pillar trim upward, then disengage clip B from the A-pillar
trim (2).
5. Pull clip B out, then rotate 45°.
6. Remove clip B from the grommet b ...