Mazda 6 Service Manual: Variable air duct (vad) check valve (one-way) inspection (l3)
1. Remove the VAD check valve (one-way). (See INTAKE-AIR SYSTEM REMOVAL/INSTALLATION)
2. Blow through A and verify that air flows from B.
3. Blow through B and verify that air does not flow from A.
- If not as specified, replace the VAD check valve (one-way).
Variable air duct (vad) control solenoid valve inspection (l3)
1. Remove the VAD control solenoid valve. (See INTAKE-AIR SYSTEM
REMOVAL/INSTALLATION.)
2. Inspect airflow between the ports under the following conditions.
If not as specified, replace the VAD ...
Idle air control (iac) valve inspection
Note
Perform the following inspection only when directed.
Operation Test
Carry out the Idle Air Control Inspection. (See Idle Air Control System
Inspection.)
If not as specified, perform ...
Other materials:
Mazda 6 Service Manual: Wheel hub bolt replacement
1. Remove the hub bolt using the SSTs.
Note
If the dust cover interferes with the wheel hub bolt and the wheel
hub bolt cannot be removed, tap the part shown in the figure with a chisel
lightly and bend the processing point back to the steering knuckle side.
2. Install the hub bolt i ...
Mazda 6 Service Manual: Operating the Radio
Radio ON
Select the icon on the home
screen to display the Entertainment screen. When selecting the desired radio, the
following icons are indicated in the lower part of the center display.
AM/FM Radio
Favorites Radio
Selected stations can be registered for convenient operation. Up to 50 ...