Mazda 6 Owners Manual: Mazda Radar Cruise Control (MRCC) Display Indication
The setting status and operation conditions of the Mazda Radar Cruise Control (MRCC) system are indicated in the multi-information display and the active driving display.
Mazda Radar Cruise Control (MRCC) (Some models)
The Mazda Radar Cruise Control (MRCC) system is designed to maintain headway
control*1 according to the vehicle speed using a radar sensor (front) to detect
the distance to a vehicle ahead, and by ...
Close Proximity Warning
If your vehicle rapidly closes in on the vehicle ahead because the vehicle applies
the brakes suddenly while you are traveling in headway control, the warning sound
activates and the brake warning ...
Other materials:
Mazda 6 Owners Manual: Instrument cluster inspection
Speedometer
Using the input/output check mode
Inspect the speedometer by setting it in the input/output check mode DTC 12.
Using a speedometer tester
1. Adjust the tire air pressure to the specification.
2. Using a speedometer tester, verify that the speedometer indication is
within the allow ...
Mazda 6 Owners Manual: Front map light removal/installation
1. Disconnect the negative battery cable.
2. Remove in the order indicated in the table.
3. Install in the reverse order of removal.
Front Map Light Removal Note
1. Insert a tape-wrapped flathead screwdriver into the gap between the
headliner and the front map light.
2. Push the hooks to ...