Mazda 6 Owners Manual: Supplemental Restraint System Components
(With Front Passenger Occupant Classification System)
(Without Front Passenger Occupant Classification System)
- Driver/Front passenger inflators and air bags
- Roll-over sensor (some models), crash sensors, and diagnostic module (SAS unit).
- Seat belt pretensioners
- Front air bag sensors
- Side crash sensors
- Air bag/seat belt pretensioner system warning light
- Side and curtain inflators and air bags
- Front passenger air bag deactivation indicator light (some models)
- Front passenger occupant classification sensor (some models)
- Front passenger occupant classification module (some models)
Supplemental Restraint System (SRS) Precautions
The front and side supplemental restraint systems (SRS) include different types
of air bags. Please verify the different types of air bags which are equipped
on your vehicle by locating the “SRS ...
How the SRS Air Bags Work
Your Mazda is equipped with the following types of SRS air bags. SRS air bags
are designed to work together with the seat belts to help to reduce injuries during
an accident.
The SRS air bags are ...
Other materials:
Mazda 6 Owners Manual: Variable tumble control system (vtcs) shutter valve actuator inspection
1. Remove the air hose. (See INTAKE-AIR SYSTEM REMOVAL/INSTALLATION.)
2. Disconnect the vacuum hose from the VTCS shutter valve actuator.
3. Connect a vacuum pump to the VTCS shutter valve actuator.
4. Apply vacuum and verify that the rod moves.
If the rod dose not move, replace the intake ...
Mazda 6 Owners Manual: Steering gear and linkage inspection
Rack Inspection
1. Inspect the rack for cracking, damage, and tooth wear. Replace it as
necessary.
2. Measure the runout of the rack.
Runout
Near point A: 0.15 mm {0.006 in} max.
Near point B: 0.20 mm {0.008 in} max.
3. If not within the specification, replace the rack.
Tie-rod End ...