Mazda 6 manuals

Mazda 6 Owners Manual: Transmitter


NOTE

1. Switch the ignition off and close all of the doors and the trunk lid.

2. Open the driver's door.

3. Within 30 seconds of opening the driver's door, press and hold the LOCK button on the key for 5 seconds or longer

All of the doors lock and the beep sound activates at the currently set volume. The setting changes each time the LOCK button on the key is pressed and the beep sound activates at the set volume. (If the beep sound has been set to not activate, it will not activate.)

4. The setting change is completed by doing any one of the following:

  • Switching the ignition to ACC or ON.
  • Closing the driver's door.
  • Opening the trunk lid.
  • Not operating the key for 10 seconds.
  • Pressing any button except the LOCK button on the key.
  • Pressing a request switch.

The operation indicator light flashes when the buttons are pressed.

Lock button

To lock the doors , press the lock button and the hazard warning lights will flash once.

(With the advanced keyless function)

A beep sound will be heard once.

To confirm that all doors have been locked, press the lock button again within 5 seconds. If they are closed and locked, the horn will sound.


NOTE

Unlock button

To unlock the driver's door, press the unlock button and the hazard warning lights will flash twice.

(With the advanced keyless function)

A beep sound will be heard twice.

To unlock all doors , press the unlock button again within 3 seconds and two more beep sounds will be heard.


NOTE

1. Switch the ignition off and close all of the doors and the trunk lid.

2. Open the driver's door.

3. Within 30 seconds of opening the driver's door, press and hold the UNLOCK button on the key for 5 seconds or longer (the sound of the doors locking/unlocking can be heard).

After this, the system switches the setting each time the UNLOCK button is pressed (the sound of the doors locking/unlocking can be heard).

4. The setting change is completed by doing any one of the following:

  • Switching the ignition to ACC or ON.
  • Closing the driver's door.
  • Opening the trunk lid.
  • Not operating the key for 10 seconds.
  • Pressing any button except the UNLOCK button on the key.
  • Pressing a request switch.

Trunk button

To open the trunk lid, press and hold the trunk button until the trunk lid opens.


Panic button

If you witness from a distance someone attempting to break into or damage your vehicle, press and hold the panic button to activate the vehicle's alarm. Call emergency services if necessary.


NOTE

The panic button will work whether any door or the trunk lid is open or closed.

(Turning on the alarm)

Pressing the panic button for 1 second or more will trigger the alarm for about 2 minutes and 30 seconds, and the following will occur:

(Turning off the alarm)

Pressing the panic button for 1 second or more will trigger the alarm for about 2 minutes and 30 seconds, and the following will occur:

The horn sounds intermittently.

The hazard warning lights flash.

(Turning off the alarm)

The alarm stops by pressing any button on the key.

Keyless Entry System
This system uses the key buttons to remotely lock and unlock the doors and the trunk lid, and opens the trunk lid. The system can start the engine without having to take the key out of your purse ...

Operational Range
The system operates only when the driver is in the vehicle or within operational range while the key is being carried. Starting the Engine NOTE Starting the engine may be possible even if the ...

Other materials:

Mazda 6 Owners Manual: Shroud panel removal/installation
1. Remove the bonnet. (See BONNET REMOVAL/INSTALLATION.) 2. Remove the front bumper. (See FRONT BUMPER REMOVAL/INSTALLATION.) 3. Remove the front combination light. (See FRONT COMBINATION LIGHT REMOVAL/INSTALLATION.) 4. Remove the front bumper reinforcement. (See BUMPER REINFORCEMENT REMOVAL/ ...

Mazda 6 Owners Manual: General procedures
Wheels and Tires Removal/Installation The removal and installation procedures for the wheels and tires are not mentioned in this section. When a wheel is removed, tighten it to 88-118 N·m {9.0-12.0 kgf·m, 65.0-87.0 ft·lbf}. Power Steering Components Removal/Installation If any power steeri ...

© 2016-2018 Copyright www.mazda6info.net