Mazda 6 Owners Manual: Plastic Part Maintenance
CAUTION
Do not use polishing agents. Depending on the product ingredients, they could cause discoloration, stains, cracks or peeling of the coating.
Vinyl Upholstery Maintenance
Remove dust and dirt from the vinyl upholstery using a brush or vacuum. Remove
soiling from vinyl upholstery using a leather and vinyl upholstery cleaner.
Upholstery Maintenance
1. Clean the soile ...
Instrument Panel Top (Soft pad) Maintenance
Extremely soft material is used for the soft pad surface. If the soft pad surface
is rubbed harshly with a dry cloth, it could result in the surface being damaged
and leaving white scratch marks.
...
Other materials:
Mazda 6 Owners Manual: Inboard combination light removal/installation
1. Disconnect the negative battery cable.
2. Remove the trunk lid trim (liftgate lower trim). (See TRUNK LID TRIM
REMOVAL/INSTALLATION) (See LIFTGATE LOWER TRIM REMOVAL/INSTALLATION)
3. Remove in the order indicated in the table.
4. Install in the reverse order of removal.
Inboard Combinat ...
Mazda 6 Owners Manual: Knock sensor inspection
Note
Perform the following test only when directed.
Resistance Inspection
1. Turn the ignition switch to LOCK.
2. Disconnect the knock sensor connector.
3. Measure the resistance between the knock sensor terminals A and B using an
ohmmeter.
If not as specified, replace the knock sens ...