Mazda 6 Service Manual: Audio control switch removal/installation
Note
- The audio control switch and the cruise control switch use a common connector.
1. Disconnect the negative battery cable.
2. Remove the driver-side air bag module. (See DRIVER-SIDE AIR BAG MODULE REMOVAL/INSTALLATION.)
3. Remove the steering wheel.
4. Remove in the order indicated in the table.
5. Install in the reverse order of removal.
Lcd unit removal/installation
1. Disconnect the negative battery cable.
2. Remove the center panel module. (See CENTER PANEL MODULE
REMOVAL/INSTALLATION.)
3. Remove in the order indicated in the table.
4. Install in the r ...
Audio control switch inspection
1. Disconnect the negative battery cable.
2. Remove the driver-side air bag module. (See DRIVER-SIDE AIR BAG MODULE
REMOVAL/INSTALLATION.)
3. Disconnect the audio control switch connector.
4. Mea ...
Other materials:
Mazda 6 Service Manual: Hill Launch Assist (HLA)
Hill Launch Assist (HLA) is a function which assists the driver in accelerating
from a stop while on a slope. When the driver releases the brake pedal and depresses
the accelerator pedal while on a slope, the function prevents the vehicle from rolling.
The braking force is maintained automatic ...
Mazda 6 Service Manual: To Resume Cruising Speed at More Than 25 km/h (16 mph)
If some other method besides the OFF/ CANCEL switch was used to cancel cruising
speed (such as applying the brake pedal) and the system is still activated, the
most recent set speed will automatically resume when the RESUME/
switch is pressed.
If vehicle speed is below 25 km/h (16 mph), incre ...