Mazda 6 Owners Manual: Indication/Indicator Lights
These lights turn on or flash to notify the user of the system operation status or a system malfunction.
*Some models.
*1 The light turns on when the ignition is switched on for an operation check, and turns off a few seconds later or when the engine is started. If the light does not turn on or remains turned on, have the vehicle inspected at an Authorized Mazda Dealer.
Warning Indication/Warning Lights
These lights turn on or flash to notify the user of the system operation status
or a system malfunction.
*1 The light turns on when the ignition is switched on for an operation check,
and t ...
Wrench Indicator Light (Some models)
When the ignition is switched ON, the wrench indicator light turns on and then
turns off after a few seconds.
The wrench indicator light turns on under the following conditions:
When the pres ...
Other materials:
Mazda 6 Owners Manual: Dynamic Stability Control (DSC)
The Dynamic Stability Control (DSC) automatically controls braking and engine
torque in conjunction with systems such as ABS and TCS to help control side slip
when driving on slippery surfaces, or during sudden or evasive maneuvering, enhancing
vehicle safety.
Refer to ABS and TCS.
DSC opera ...
Mazda 6 Owners Manual: Panel light control switch inspection
1. Connect the connector to the panel light control switch.
2. Connect the negative battery cable.
3. Measure the voltage at the panel light control switch using voltmeter.
When inspecting terminal B for continuity, disconnect the panel light
control switch connector.
4. If the value are ...