Mazda 6 Service Manual: Installation of radio system
If a radio system is installed improperly or if a high-powered type is used, the CIS and other systems may be affected. When the vehicle is to be equipped with a radio, observe the following precautions:
- Install the antenna at the farthest point from control modules.
- Install the antenna feeder as far as possible from the control module harnesses.
- Ensure that the antenna and feeder are properly adjusted.
- Do not install a high-powered radio system.
Sst
Some Ford SST or equivalent are used as SSTs necessary for
engine repair. Note that these SSTs are marked with Ford SST
numbers.
Note that a Ford SST number is written together with a
co ...
Other materials:
Mazda 6 Service Manual: Clutch pedal removal/installation
1. Remove the battery and battery tray. (European (L.H.D.) and GCC specs.)
2. Remove in the order indicated in the table.
3. Install in the reverse order of removal.
4. After installation, adjust the clutch pedal. (See CLUTCH PEDAL
ADJUSTMENT.)
у
Clutch Pedal Installation Note
Afte ...
Mazda 6 Service Manual: Key reminder switch inspection
1. Disconnect the negative battery cable.
2. Remove the column cover. (See COLUMN COVER REMOVAL/INSTALLATION)
3. Disconnect the key reminder switch connector.
4. Inspect for continuity between the key reminder switch terminals using an
ohmmeter.
If not as specified, replace the key reminder ...