Mazda 6 Service Manual: Instrument cluster disassembly/assembly
Caution
- If the instrument cluster is dropped or the print plate is damaged, the system will not work properly and it may be the cause of trouble or malfunctions.
1. Disassemble in the order indicated in the table.
2. Assemble in the reverse order of disassembly.
Instrument cluster configuration
1. Connect the SST (WDS or equivalent) to the DLC-2.
2. Input vehicle information following the directions on the screen.
3. Select Module programming.
4. Select Programmable module installation. ...
Instrument cluster inspection
Speedometer
Using the input/output check mode
Inspect the speedometer by setting it in the input/output check mode DTC 12.
Using a speedometer tester
1. Adjust the tire air pressure to the specifi ...
Other materials:
Mazda 6 Service Manual: Active Adaptive Shift (AAS)
Active Adaptive Shift (AAS) automatically controls the transaxle shift points
to best suit the road conditions and driver input. This improves driving feel. The
transaxle may switch to AAS mode when driving up and down slopes, cornering, driving
at high elevations, or depressing the accelerato ...
Mazda 6 Service Manual: Tire Chains
Check local regulations before using tire chains.
CAUTION
Chains may affect handling.
Do not go faster than 50 km/h (30 mph) or the chain manufacturer's recommended
limit, whichever is lower.
Drive carefully and avoid bumps, holes, and sharp turns.
Avoid locked-wheel braking.
Do not ...