Note
1. Disassemble in the order indicated in the table.
2. Assemble in the reverse order of disassembly.
Power Steering Oil Pump Component Disassembly Note
Secure the power pressure oil pump using the SST
.
Caution
Clip Disassembly Note
1. Lift up the clip tab using a flathead screwdriver.
2. Remove the clip pushing with a flathead screwdriver and a hammer as shown in the figure.
Clip Assembly Note
1. Push the clip slowly to the direction shown in the figure.
2. Confirm that the clip tab is caught correctly.
Oil Seal Assembly Note
Install the oil seal in the front pump body using the SST
and plastic hammer.
Vane Assembly Note
Place the vanes in the rotor with the rounded edges contacting the cam.
Cam Ring Assembly Note
Install the cam ring in the front pump body with the mark facing upward.
Rear Pump Body Assembly Note
After installing the rear body, manually turn the shaft to verify that it rotates smoothly.
Mazda 6 Service Manual: Front stabilizer removal/installation
1. Remove the front crossmember component. (See FRONT CROSSMEMBER
REMOVAL/INSTALLATION.)
2. Remove in the order indicated in the table.
3. Install in the reverse order of removal.
4. Adjust the headlight zeroset. (See HEADLIGHT ZEROSET.)
5. Inspect the front wheel alignment. (See FRONT WHEEL A ...
Mazda 6 Service Manual: Inside Trunk Release Lever (Some models)
Your vehicle is equipped with an inside trunk release lever that provides a means
of escape for children and adults in the event they become locked inside the trunk.
No matter how careful adults might be with keys and locking their cars, parents
should be aware that children may be tempted to p ...