Mazda 6 Service Manual: Relay location

Cigarette lighter inspection

1. Turn the ignition switch to ACC position. 2. Verify that the cigarette lighter comes out within 10-20 seconds, after pressing the plug into the socket. If the cigarette lighter does not oper ...

Relay inspection

Relay Type Four-terminal Type A 1. Remove the relay. 2. Inspect for continuity between the relay terminals using an ohmmeter. If not as specified, replace the relay. Type B 1. Remove ...

Other materials:

Mazda 6 Service Manual: Pid/data monitor inspection
  1. Connect the WDS or equivalent to the DLC-2. 2. Measure the PID value. Note Perform part inspection for the output device after PCM inspection. The PID/DATA MONITOR function monitors the calculated value of the input/output signals in the PCM. Therefore, if a monitored value ...

Mazda 6 Service Manual: Manually Shifting Down
You can shift gears down by operating the selector lever or the steering shift switches (some models). M6 → M5 → M4 → M3 → M2→ M1 Using selector lever To shift down to a lower gear, tap the selector lever forward (-) once. Using steering shift switch (Some model ...