Mazda 6 manuals

Mazda 6 Service Manual: Scheduled maintenance

Mazda 6 Service Manual / General information / Scheduled maintenance

SCHEDULED MAINTENANCE TABLE

For Europe (L.H.D. U.K.)

Chart symbols:

I

: Inspect and repair, clean, adjust, or replace if necessary. (Oil-permeated air cleaner elements cannot be cleaned using the air-blow method.)

R

: Replace

T

: Tighten

L

: Lubricate

Remarks:

*1: Also inspect and adjust the power steering and air conditioner drive belts, if installed.

*2: If the vehicle is operated under any of the following conditions, change the engine oil and oil filter every 10,000 km (6,250 miles) or shorter.

a. Driving in dusty conditions.

b. Extended periods of idling or low speed operation.

c. Driving for long period in cold temperatures or driving regularly at short distance only.

*3: If the vehicle is operated in very dusty or sandy areas, clean and if necessary, replace the air cleaner element more often than the recommended intervals.

*4: If the brakes are used extensively (for example, continuous hard driving or mountain driving) or if the vehicle is operated in extremely humid climates, change the brake fluid annually.



For Israel

Chart symbols:

I

: Inspect and clean, repair, adjust, or replace if necessary. (Oil-permeated air cleaner elements cannot be cleaned using the air-blow method.)

R

: Replace

L

: Lubricate

C

: Clean

Remarks:

*1: Also inspect and adjust the power steering and air conditioner drive belts, if installed.

*2: If the vehicle is operated under any of the following conditions, change the engine oil and oil filter every 10,000 km (6,000 miles) or shorter.

a. Driving in dusty conditions.

b. Extended periods of idling or low speed operation.

c. Driving for long period in cold temperatures or driving regularly at short distance only.

*3: If the vehicle is operated in very dusty or sandy areas, inspect and if necessary, clean or replace the air cleaner element more often than the recommended intervals.

*4: This is a full function check of electrical systems such as lights, wiper and washer systems (including wiper blades), and power windows.

*5: If the brakes are used extensively (for example, continuous hard driving or mountain driving) or if the vehicle is operated in extremely humid climates, change the brake fluid annually.



For GCC

Chart symbols:

I

: Inspect and repair, clean, adjust, or replace if necessary. (Oil-permeated air cleaner elements cannot be cleaned using the air-blow method.)

R

: Replace

T

: Tighten

C

: Clean

Remarks:

*1: Also inspect and adjust the power steering and air conditioner drive belts, if installed.

*2: If the vehicle is operated under any of the following conditions, change the engine oil and oil filter more often than recommended intervals.

a. Driving in dusty conditions.

b. Extended periods of idling or low speed operation.

c. Driving for long period in cold temperatures or driving regularly at short distance only.

*3: If the vehicle is operated in very dusty or sandy areas, inspect and if necessary, clean or replace the air cleaner element more often than the recommended intervals.

*4: This is a full function check of electrical systems such as lights, wiper and washer systems (including wiper blades), and power windows.

*5: If the brakes are used extensively (for example, continuous hard driving or mountain driving) or if the vehicle is operated in extremely humid climates, change the brake fluid annually.


Scheduled Maintenance Service (Specific Work Required)

For Europe (L.H.D. U.K.)



Pre-delivery inspection
PRE-DELIVERY INSPECTION TABLE EXTERIOR INSPECT and ADJUST, if necessary, the following items to specification: - Glass, exterior bright metal and paint for damage - All weatherstrips for da ...

Engine
...

Other materials:

Mazda 6 Service Manual: Magnetic clutch adjustment
1. Measure the clearance around the entire circumference between the pressure plate and A/C compressor pulley using a thickness gauge. 2. Verify that the clearance is within the specification. If not within the specification, remove the pressure plate and adjust the clearance by changing ...

Mazda 6 Service Manual: Drive shaft (mtx) disassembly/assembly
1. Disassemble in the order indicated in the table. 2. Assemble in the reverse order of disassembly. Clip Disassembly Note 1. Mark the drive shaft and outer ring for proper assembly. Caution Mark with paint; do not use a punch. 2. Remove the clip. Balls, Inner Ring, Cage Disassembl ...

© 2016-2024 Copyright www.mazda6info.net