Mazda 6 Service Manual: Towing
- Proper lifting and towing are necessary to prevent damage to the vehicle. Government and local laws must be followed.
- A towed vehicle should have its front wheels off the ground. If excessive damage or other conditions prevent this, use wheel dollies.
- When towing with the rear wheels on the ground, release the parking brake.
Caution
- Do not tow the vehicle backward with driving wheels on the ground. This may cause internal damage to the transaxle.
Caution
- Do not tow with sling-type equipment. This could damage your vehicle. Use wheel-lift or flatbed equipment.
Caution
- Do not use the hook loops under the front and rear for towing. They are designed ONLY for tying down the vehicle when it is being transported. Using them for towing will damage the bumper.
Towing
...
Towing hooks
Caution
The towing hooks should be used only in an emergency (to get the
vehicle out of a ditch or a snow bank, for example).
When using the towing hooks, always pull the cable or chain in a ...
Other materials:
Mazda 6 Service Manual: Oil control valve (ocv) inspection
L3
Coil Resistance Inspection
1. Disconnect the negative battery cable.
2. Disconnect the oil control valve connector.
3. Measure the resistance between terminals A and B using an ohmmeter.
If not as specified, replace the oil control valve.
Specification
6.9-7.9 ohms
4. Connect ...
Mazda 6 Service Manual: Trip Computer and INFO Switch (Without Multi-information Display)
The following information can be selected by pressing the INFO switch with the
ignition switched ON.
Distance-to-empty mode
Average fuel economy mode
Current fuel economy mode
Compass mode
If you have any problems with your trip computer, consult an Authorized Mazda
Dealer.
Distanc ...