Mazda 6 manuals

Mazda 6 Service Manual: No.1 any of the following lights do not illuminate with ignition switch on: (abs warning light, brake system warning light, dsc indicator light and/or tcs-off light)

Mazda 6 Service Manual / Braking system / Troubleshooting (abs/tcs/dynamic stability control) / No.1 any of the following lights do not illuminate with ignition switch on: (abs warning light, brake system warning light, dsc indicator light and/or tcs-off light)


Diagnostic procedure


No.11 there is malfunction in the system even though abs warning light, brake system warning light, tcs off light do not illuminte
Diagnostic procedure ...

No.2 any of the following lights stay on: (abs warning light, brake system warning light, dsc indicator light and/or tcs-off light)
Diagnostic procedure ...

Other materials:

Mazda 6 Service Manual: Inspecting Engine Oil Level
1. Be sure the vehicle is on a level surface. 2. Warm up the engine to normal operating temperature. 3. Turn it off and wait at least 5 minutes for the oil to return to the oil pan. 4. Pull out the dipstick, wipe it clean, and reinsert it fully. 5. Pull it out again and examine the level. The ...

Mazda 6 Service Manual: Headlight cleaner nozzle removal/installation
1. Remove the front bumper. (See FRONT BUMPER REMOVAL/INSTALLATION) 2. Disconnect the headlight cleaner hose. (See HEADLIGHT CLEANER HOSE REMOVAL/INSTALLATION) 3. Remove in the order indicated in the table. 4. Install in the reverse order of removal. 5. Adjust the headlight cleaner nozzle. ...

© 2016-2020 Copyright www.mazda6info.net