Mazda 6 manuals

Mazda 6 Owners Manual: Personalization Features

Mazda 6 Owners Manual / Specifications / Personalization Features

The following personalization features can be set or changed by the customer or an Authorized Mazda Dealer. Consult an Authorized Mazda Dealer for details.

Additionally, some of the personalization features can be changed by the customer depending on the feature.

Personalization features and settings which can be changed differ depending on the market and specification.

Settings Change Method

1. Settings can be changed by operating the center display screen.

A: Refer to Settings.

B: Refer to Fuel Economy Monitor.

C: Refer to Active Driving Display.

2. Settings can be changed by operating the vehicle switches.

D: Refer to Auto Lock/Unlock Function.

E: Refer to Transmitter.

F: Refer to Locking, Unlocking with Request Switch (With the advanced keyless function).

3. Settings can be changed by an Authorized Mazda Dealer.







*1 Though these systems can be turned Off, doing so will defeat the purpose of the system and Mazda recommends that these systems remain On.

*2 Only the volume of the warning beep during Blind Spot Monitoring (BSM) operation can be changed. The volume of the warning beep during Rear Cross Traffic Alert (RCTA) operation cannot be changed.

*3 This system functions only when the navigation system is functioning.

*4 If the auto-wiper control is set to Off, the wiper lever position is set to intermittent
operation.

*5 If the setting is changed to Off, the following operation is performed according to the headlight switch position:

*6 When set to Off, the lights-on reminder is operable.

*7 The lights-on reminder settings can be changed at anytime, however, the lights-on reminder only operates when the auto headlight function is set to Off. Refer to Lights-On Reminder.

*8 The operation may stop in 15 minutes due to the effect of the outside temperature even if the operation time of the rear window defogger has been changed to Continuous.

*9 Change the ambient light illumination level with the parking lights or headlights turned on.

*10 When set to OFF, the ambient lights remain turned off regardless of whether of not the parking lights or headlights are on or off. However, they will turn on or off in conjunction with the illuminated entry system.

*11 Available only in display from the center display.

Specifications
Engine Electrical System *1 Q-85 is designed for i-ELOOP system. Only Q-85 should be used to ensure correct operation of i-ELOOP system. Consult an Authorized Mazda Dealer for details. *2 Not ...

Mazda 6 Service Manual
 ...

Other materials:

Mazda 6 Owners Manual: Vehicle speedometer sensor (vss) removal/installation
Caution Water or foreign objects entering the connector can cause a poor connection or corrosion. Be sure not to drop water or foreign objects on the connector when disconnecting it. If foreign materials are stuck to the VSS, disturbance by magnetic flux can cause sensor output to be ...

Mazda 6 Owners Manual: Bonnet switch inspection
Note Bonnet switch has a built-in bonnet lock. 1. Open the bonnet. 2. Disconnect the negative battery cable. 3. Remove the radiator grille. 4. Disconnect the bonnet switch connector. 5. Check the continuity between the bonnet switch terminals A and B using an ohmmeter. If there is ...

© 2016-2019 Copyright www.mazda6info.net