Mazda 6 Service Manual: Troubleshooting [keyless entry system]
- Foreword
- Keyless entry system check sheet
- Keyless entry system preliminary inspection
- On-board diagnostic function
- Troubleshooting index
- No. 1 one or more on-board diagnostic functions inoperative
- No. 2 all on-board diagnostic functions inoperative
- No. 3 transmitter id code cannot be reprogrammed
No. 3 driver-side front window reverses even though the glass does not
encounter a foreign object while it is going up in automatic mode
Diagnostic procedure
...
Foreword
Go to troubleshooting after identifying the specific malfunction by
doing a keyless entry system preliminary inspection.
Flowchart
...
Other materials:
Mazda 6 Service Manual: Joint shaft removal/installation
Caution
Performing the following procedures without first removing the ABS
wheel-speed sensor may possibly cause an open circuit in the harness if it
is pulled by mistake. Before performing the following procedures, remove the
ABS wheel-speed sensor and fix it to an appropriate place wh ...
Mazda 6 Service Manual: Transaxle fluid temperature (tft) sensor removal/installation
Warning
When the transaxle and ATF are hot, they can badly burn. Turn off
the engine and wait until they are cool before replacing the ATF.
1. Remove the oil pan. (See CONTROL VALVE BODY REMOVAL.)
2. Disconnect the TFT sensor connector.
3. Remove the TFT sensor.
4. Install a TFT senso ...