Mazda 6 Owners Manual: Cleaning the Floor Mats
Rubber floor mats should be cleaned with mild soap and water only.
WARNING
Do not use rubber cleaners, such as tire cleaner or tire shine, when cleaning rubber floor mats:
Cleaning the rubber floor mats with rubber cleaning products makes the floor mats slippery.
This may cause an accident when depressing the accelerator, brake, or clutch (Manual transaxle) pedal or when getting in or out of the vehicle.
After removing the floor mats for cleaning, always reinstall them securely.
Cleaning the Window Interiors
CAUTION
Do not scrape or scratch the inside of the window glass. It could damage
the thermal filaments and the antenna lines.
When washing the inside of the window glass, use a soft cloth dam ...
Other materials:
Mazda 6 Owners Manual: Input/turbine speed sensor removal/installation
1. Disconnect the negative battery cable.
2. Remove the battery and battery tray.
3. Remove the air cleaner component. (See INTAKE-AIR SYSTEM
REMOVAL/INSTALLATION.)
4. Disconnect the input/turbine speed sensor connector.
5. Remove the input/turbine speed sensor.
6. Apply ATF to a new O-ring ...
Mazda 6 Owners Manual: Airflow mode actuator inspection
1. Connect battery positive voltage to terminal D or F and ground to terminal
F or D of the airflow mode actuator.
2. Verify that the airflow mode actuator operates as shown below.
If not as specified, replace the airflow mode actuator.
3. Verify that the resistance between the ter ...