Customer Information and Reporting Safety Defects
Customer Assistance (U.S.A.)Mazda 6 Owners Manual: Abs (abs/tcs) hu/cm inspection
1. Disconnect the negative battery cable.
2. Connect the SST between the ABS (ABS/TCS) HU/CM and harness
connector with the ignition switch off.
3. Attach the tester leads to the SST and inspect voltage referring
the table below.
Terminal Voltage Table (Reference)
(Engine is idling, and co ...
Mazda 6 Owners Manual: Air bleeding
Caution
Maintain the fluid level in the reservoir tank properly while
bleeding the air.
Specified fluid
Note
The brakes should be bled whenever a brake line is disconnected.
If a hydraulic line is disconnected at the master cylinder, start at the
slave cylinder farthest from t ...