Mazda 6 Owners Manual: Daytime Running Lights
Some countries require moving vehicles to have their lights on (daytime running lights) during the daytime. The daytime running lights turn on when the vehicle is driven and turn off when the parking brake is operated or the selector lever is shifted to the P position (automatic vehicle).
NOTE
(Except Canada)
The daytime running lights can be deactivated.
Headlight Leveling (Some models)
The number of passengers and weight of cargo in the luggage compartment change
the angle of the headlights.
The angle of the headlights will be automatically adjusted when turning on the
headligh ...
Fog Lights (Some models)
The fog lights can be turned on with the ignition switched ON and the headlights
turned on.
Use this switch to turn on the fog lights. The fog lights will improve visibility
at night and during f ...
Other materials:
Mazda 6 Owners Manual: Crankshaft position (ckp) sensor inspection
Note
Perform the following inspection only when directed.
Resistance Inspection
1. Disconnect the CKP sensor connector.
2. Measure the resistance between CKP sensor terminals A and B using an
ohmmeter.
If not as specified, replace the CKP sensor.
If CKP sensor resistance is okay, bu ...
Mazda 6 Owners Manual: Schedule 1
Chart symbols:
I: Inspect: Inspect and clean, repair, adjust, fill up, or replace if
necessary.
R: Replace
L: Lubricate
T: Tighten
Remarks:
*1 Use of FL-22 is recommended when replacing engine coolant. Using engine coolant
other than FL-22 may cause serious damage to the engine and cooli ...