Mazda 6 Owners Manual: Fuse Panel Description
Fuse block (Engine compartment)
*Some models.
Fuse block (Left side)
*Some models.
Fuse Replacement
Replacing the fuses on the vehicle's left side
If the electrical system does not work, first inspect the fuses on the vehicle's
left side.
1. Make sure the ignition is switched off, and other swit ...
Appearance Care
...
Other materials:
Mazda 6 Owners Manual: Control valve body installation
On-Vehicle Installation
Caution
Be sure to align the parking rod and the manual valve.
1. Install the accumulator springs and accumulators into the transaxle case.
2. Install the control valve body component.
Tightening torque
7.8-10.8 N·m
{80-110 kgf·cm, 70-95 in·lbf}
Bo ...
Mazda 6 Owners Manual: Front fender panel
FRONT FENDER PANEL REMOVAL/INSTALLATION
1. Disconnect the negative battery cable.
2. Remove the front side turn light.
3. Remove the fender molding. (See COWL GRILLE REMOVAL/INSTALLATION.)
4. Remove the front bumper. (See FRONT BUMPER REMOVAL/INSTALLATION.)
5. Remove the front combination light ...