
Diagnostic procedure

Mazda 6 Service Manual: Coil removal/installation
Note
Do not remove the coil unless you are replacing it.
When only the coil is replaced, the immobilizer system reprogram
procedure is not necessary.
1. Disconnect the negative battery cable.
2. Remove the column cover.
3. Remove in the order indicated in the table.
4. Install in ...
Mazda 6 Service Manual: Bonnet switch inspection
Note
Bonnet switch has a built-in bonnet lock.
1. Open the bonnet.
2. Disconnect the negative battery cable.
3. Remove the radiator grille.
4. Disconnect the bonnet switch connector.
5. Check the continuity between the bonnet switch terminals A and B using an
ohmmeter.
If there is ...