Mazda 6 manuals

Mazda 6 Service Manual: Scheduled maintenance

Mazda 6 Service Manual / General information / Scheduled maintenance

SCHEDULED MAINTENANCE TABLE

For Europe (L.H.D. U.K.)

Chart symbols:

I

: Inspect and repair, clean, adjust, or replace if necessary. (Oil-permeated air cleaner elements cannot be cleaned using the air-blow method.)

R

: Replace

T

: Tighten

L

: Lubricate

Remarks:

*1: Also inspect and adjust the power steering and air conditioner drive belts, if installed.

*2: If the vehicle is operated under any of the following conditions, change the engine oil and oil filter every 10,000 km (6,250 miles) or shorter.

a. Driving in dusty conditions.

b. Extended periods of idling or low speed operation.

c. Driving for long period in cold temperatures or driving regularly at short distance only.

*3: If the vehicle is operated in very dusty or sandy areas, clean and if necessary, replace the air cleaner element more often than the recommended intervals.

*4: If the brakes are used extensively (for example, continuous hard driving or mountain driving) or if the vehicle is operated in extremely humid climates, change the brake fluid annually.



For Israel

Chart symbols:

I

: Inspect and clean, repair, adjust, or replace if necessary. (Oil-permeated air cleaner elements cannot be cleaned using the air-blow method.)

R

: Replace

L

: Lubricate

C

: Clean

Remarks:

*1: Also inspect and adjust the power steering and air conditioner drive belts, if installed.

*2: If the vehicle is operated under any of the following conditions, change the engine oil and oil filter every 10,000 km (6,000 miles) or shorter.

a. Driving in dusty conditions.

b. Extended periods of idling or low speed operation.

c. Driving for long period in cold temperatures or driving regularly at short distance only.

*3: If the vehicle is operated in very dusty or sandy areas, inspect and if necessary, clean or replace the air cleaner element more often than the recommended intervals.

*4: This is a full function check of electrical systems such as lights, wiper and washer systems (including wiper blades), and power windows.

*5: If the brakes are used extensively (for example, continuous hard driving or mountain driving) or if the vehicle is operated in extremely humid climates, change the brake fluid annually.



For GCC

Chart symbols:

I

: Inspect and repair, clean, adjust, or replace if necessary. (Oil-permeated air cleaner elements cannot be cleaned using the air-blow method.)

R

: Replace

T

: Tighten

C

: Clean

Remarks:

*1: Also inspect and adjust the power steering and air conditioner drive belts, if installed.

*2: If the vehicle is operated under any of the following conditions, change the engine oil and oil filter more often than recommended intervals.

a. Driving in dusty conditions.

b. Extended periods of idling or low speed operation.

c. Driving for long period in cold temperatures or driving regularly at short distance only.

*3: If the vehicle is operated in very dusty or sandy areas, inspect and if necessary, clean or replace the air cleaner element more often than the recommended intervals.

*4: This is a full function check of electrical systems such as lights, wiper and washer systems (including wiper blades), and power windows.

*5: If the brakes are used extensively (for example, continuous hard driving or mountain driving) or if the vehicle is operated in extremely humid climates, change the brake fluid annually.


Scheduled Maintenance Service (Specific Work Required)

For Europe (L.H.D. U.K.)



Pre-delivery inspection
PRE-DELIVERY INSPECTION TABLE EXTERIOR INSPECT and ADJUST, if necessary, the following items to specification: - Glass, exterior bright metal and paint for damage - All weatherstrips for da ...

Engine
...

Other materials:

Mazda 6 Service Manual: Front and rear fog light switch inspection
Light switch LH side 1. Remove the light switch. (See LIGHT SWITCH REMOVAL/INSTALLATION.) 2. Inspect for continuity between the light switch terminals using an ohmmeter. If not as specified, replace the light switch. Light switch RH side 1. Remove the light switch. (See LIGHT SWITCH ...

Mazda 6 Service Manual: Overheating
If the high engine coolant temperature warning light turns on, the vehicle loses power, or you hear a loud knocking or pinging noise, the engine is probably too hot. WARNING Pull over to a safe location, then switch the ignition off and make sure the fan is not running before attempting t ...

© 2016-2024 Copyright www.mazda6info.net