Mazda 6 Owners Manual: Active Driving Display Maintenance (Some models)
The combiner and mirror surface have a special coating. When cleaning it, do not use a hard cloth, a cloth with a rough surface, or cleaning detergent. Use a finetextured, soft cloth.
If a chemical solvent gets on the combiner or mirror surface, wipe it off immediately. Otherwise, they could be damaged and the surface coating could be scratched.
Instrument Panel Top (Soft pad) Maintenance
Extremely soft material is used for the soft pad surface. If the soft pad surface
is rubbed harshly with a dry cloth, it could result in the surface being damaged
and leaving white scratch marks.
...
Panel Maintenance
If a panel becomes soiled, wipe it off with a soft cloth soaked in clean water
and thoroughly wrung out.
If some areas require further cleaning, use the following procedure:
1. Wipe the soiled are ...
Other materials:
Mazda 6 Owners Manual: Rear seat disassembly/assembly
4SD
1. Disassemble in the order indicated in the table.
2. Assemble in the reverse order of disassembly.
5HB
1. Disassemble in the order indicated in the table.
2. Assemble in the reverse order of disassembly.
...
Mazda 6 Owners Manual: Oil control valve (ocv) inspection
L3
Coil Resistance Inspection
1. Disconnect the negative battery cable.
2. Disconnect the oil control valve connector.
3. Measure the resistance between terminals A and B using an ohmmeter.
If not as specified, replace the oil control valve.
Specification
6.9-7.9 ohms
4. Connect ...