Mazda 6 Service Manual: Air bag module and pre-tensioner seat belt disposal procedures
Warning
- Before scrapping a vehicle with a live (undeployed) air bag module
and pre-tensioner seat belt, deploy the air bag module and pre-tensioner
seat belt. Never dispose of a live (undeployed) air bag module and pre-tensioner
seat belt.
- The air bag module and the pre-tensioner seat belt are very hot
immediately after they are deployed. You can get burned. Do not touch the
air bag module and pre-tensioner seat belt for at least 15 minutes after
deployment.
- Pouring water on the deployed air bag module and pre-tensioner seat
belt is dangerous. The water will mix with the residual gases to form a gas
that can make breathing difficult. Do not pour water on the deployed air bag
module and pre-tensioner seat belt.
- The deployed air bag module and pre-tensioner seat belt may contain
deposits of sodium hydroxide, a caustic byproduct of the gas-generated
combustion. If this substance gets into your eyes or on your hands, it can
cause irritation and itching. When handling the deployed air bag module and
pre-tensioner seat belt, wear gloves and safety glasses.
- Due to the adoption of 2-step deployment control in both the driver
and passenger-side air bag modules, depending on the impact force, it is
possible that inflator No. 2 might not deploy. In such cases, before
disposing of the air bag module, make sure to follow the inflator deployment
procedures and verify complete deployment of inflator No. 1 and 2.
1. Put on gloves and safety glasses.
2. Put the deployed air bag module or pre-tensioner seat belt in a plastic
bag, seal it, and then dispose of it.
3. Wash your hands after removing your gloves.
Warning
A live (undeployed) air bag module and pre-tensioner seat belt may
accidentally deploy when it is disposed of and cause serious injury. Do not
dispose of a live (undeployed) air bag ...
Use the SST (Deployment tool) to deploy a live (undeployed) air bag
module or pre-tensioner seat belt before disposing of it.
Before using the SST (Deployment tool), inspect its operation.
...
Other materials:
Mazda 6 Service Manual: Plastic Part Maintenance
When cleaning the plastic lenses of the lights, do not use gasoline, kerosene,
rectified spirit, paint, thinner, highly acidic detergents, or strongly alkaline
detergents. Otherwise, these chemical agents can discolor or damage the surfaces
resulting in a significant loss in functionalit ...
Mazda 6 Service Manual: Operating the Power Windows
NOTE
Each passenger window can be operated with each door switch when the
power window lock switch on the driver's door is in the unlocked position.
Each passenger window can also be operated using the master control switches
on the driver's door.
Normal opening/closing
To open the ...