Mazda 6 Service Manual: Battery removal/installation
1. Remove in the order indicated in the table.
2. Install in the reverse order of removal.
Charging system
...
Battery inspection
Battery
Inspect the battery in the following procedure.
Test load chart
Battery positive voltage with load
Back-up Current
1. Verify that the engine switch is at OFF and that the key has be ...
Other materials:
Mazda 6 Service Manual: Blind Spot Monitoring (BSM) (Some models)
The Blind Spot Monitoring (BSM) is designed to assist the driver in checking
the area to the rear of the vehicle on both sides during lane changes by notifying
the driver of the presence of vehicles approaching from the rear in an adjacent
lane.
The Blind Spot Monitoring (BSM) detects vehicle ...
Mazda 6 Service Manual: Dsc hu/cm inspection
1. Remove the battery and battery bracket.
2. Disconnect the DSC HU/CM connector.
3. Connect the SST (49 G066 004) to the DSC HU/CM connector and
harness side connector.
4. Inspect voltage referring the table below.
Terminal Voltage Table (reference value)
(Ignition switch is at ON, and conne ...