Mazda 6 Service Manual: Center roof antenna removal/installation
1. Disconnect the negative battery cable.
2. Remove the headliner. (See HEADLINER REMOVAL/INSTALLATION.)
3. Remove in the order indicated in the table.
4. Install in the reverse order of removal.
5. After installation, verify that the rubber of the center roof antenna is installed to the roof panel with no space between them.
Condenser removal/installation
4SD
1. Disconnect the negative battery cable.
2. Remove the rear package trim.
3. Remove in the order indicated in the table.
4. Install in the reverse order of removal.
5HB
1. Disconnect th ...
Center roof antenna inspection
1. Verify that there is no continuity between the center roof antenna
terminals A and C using an ohmmeter.
2. Inspect for continuity between the center roof antenna terminals using an
ohmmete ...
Other materials:
Mazda 6 Service Manual: Transaxle range (tr) switch adjustment
1. Disconnect the negative battery cable.
2. Remove the air cleaner component. (See INTAKE-AIR SYSTEM
REMOVAL/INSTALLATION.)
Caution
Water or foreign objects entering the connector can cause a poor
connection or corrosion. Be sure not to drop water or foreign objects on the
connector w ...
Mazda 6 Service Manual: Generator removal/installation
Warning
When the battery cables are connected, touching the vehicle body with
generator terminal B will generate sparks. This can cause personal injury, fire,
and damage to the electrical components. Always disconnect the battery negative
cables before performing the following operation.
...