1. When you check the air pressure, make sure the tires are cold —meaning they are not hot from driving even a mile.
2. Remove the cap from the valve on one tire.
3. Firmly press a tire gauge onto the valve.
4. Add air to achieve recommended air pressure.
5. If you overfill the tire, release air by pushing on the metal stem in the center of the valve.
Then recheck the pressure with your tire gauge.
6. Replace the valve cap.
7. Repeat with each tire, including the spare.
NOTE
Some spare tires require higher inflation pressure.
8. Visually inspect the tires to make sure there are no nails or other objects embedded that could poke a hole in the tire and cause an air leak.
9. Check the sidewalls to make sure there are no gouges, cuts, bulges, cracks or other irregularities.
Mazda 6 Owners Manual: Pre-delivery inspection
PRE-DELIVERY INSPECTION TABLE EXTERIOR
INSPECT and ADJUST, if necessary, the following items to
specification:
- Glass, exterior bright metal and paint for damage
- All weatherstrips for damage or detachment
- Door operation and alignment including side door and back door
- Wheel lug nu ...
Mazda 6 Owners Manual: Parking brake (lever type) removal/installation
1. Remove the center console. (See CONSOLE REMOVAL/INSTALLATION.)
2. Remove the rear seat cushion (4SD) or rear seat (5HB) . (See REAR SEAT
REMOVAL/
INSTALLATION.)
3. Remove the exhaust pipe bracket.
4. Remove in the order indicated in the table.
5. Install in the reverse order of removal.
6 ...