Mazda 6 Service Manual: Clutch master cylinder removal/installation
1. Remove the battery and battry tray. (European (L.H.D.), GCC. specs.)
2. Remove in the order indicated in the table.
3. Plug the clutch pipe after removing it to avoid leakage.
4. Install in the reverse order of removal.
Clutch master cylinder disassembly/assembly
1. Disassemble in the order indicated in the table.
2. Assemble in the reverse order of disassembly.
Snap Ring Disassembly/Assembly Note
Hold the piston down using a cloth-wrapped pin punch.
...
Other materials:
Mazda 6 Service Manual: Front door unit removal/installation
1. Remove the front door glass.
2. Remove the inner handle.
3. Remove the front door speaker.
4. Disconnect the power window motor connector, front door lock actuator
connector, power outside mirror connector.
5. Remove the door harness from the front door unit.
6. Remove the bolts.
7. Rem ...
Mazda 6 Service Manual: When Trunk Lid Cannot be Opened
If the vehicle battery is dead or there is a malfunction in the electrical system
and the trunk lid cannot be opened, perform the following procedure as an emergency
measure to open it:
1. Open the cover.
2. Move the lever to the left to fold the seatback.
3. Move the lever to the left to o ...