Diagnostic procedure
Mazda 6 Service Manual: Abs (abs/tcs) hu/cm system inspection
System Inspection
Preparation
1. Verify that the battery is fully charged. With the ignition switch on,
verify that the ABS and BRAKE system warning lights goes out after 2.4
seconds.
2. If the lights stays on after 2.4 seconds, the ABS (ABS/TCS) HU/CM
detects a failure. Follow the troubles ...
Mazda 6 Service Manual: Trunk end trim removal/installation
4SD
1. Remove the fasteners.
2. Pull the trunk end trim upward, then disengage clips A, pins B, and hooks.
3. Remove the trunk end trim.
4. Install in the reverse order of removal.
5HB
1. Pull the trunk end trim upward, then disengage clips A, pins B, and hooks.
2. Remove the trunk end tr ...