Note
- When DTCs not shown in the DTC table are displayed, replace the SAS unit.
- If the air bag system warning light does not illuminate or remains illuminated when the ignition switch is turned to ON position, inspect and repair the air bag system warning light circuitry and then confirm that the air bag system warning light is operational.
- The air bag system warning light will flash the DTC pattern for five cycles, and then will remain illuminated until the ignition switch is turned to the LOCK position.
Mazda 6 Service Manual: Automatic Transaxle Controls
Various Lockouts:
Indicates that you must depress the brake
pedal and hold in the lock-release button to shift (The ignition must be switched
ON).
Indicates the shift lever can be shifted
freely into any position.
Indicates that you must hold in the lock-release
button to shift.
N ...
Mazda 6 Service Manual: Solenoid valve inspection
Resistance Inspection (On-Vehicle Inspection)
Caution
Water or foreign objects entering the connector can cause a poor
connection or corrosion. Be sure not to drop water or foreign objects on the
connector when disconnecting it.
1. Disconnect the negative battery cable.
2. Remove the ...