Mazda 6 Service Manual: Evaporator temperature sensor inspection
1. Turn the AUTO switch on.
2. Set the temperature control at MAX COLD (Turn the left).
3. Turn the A/C switch.
4. Set the RECIRCULATE mode.
5. Close all doors and windows.
6. Wait for 5 minutes.
7. Remove the glove compartment.
8. Disconnect the evaporator temperature sensor.
9. Measure the temperature at the blower inlet.
10.Measure the resistance between terminals of the evaporator temperature sensor.
- If the resistance is not as shown in the graph, replace the evaporator temperature sensor.
Evaporator temperature sensor removal/installation
Remove the evaporator temperature sensor from the A/C unit. (See A/C UNIT
DISASSEMBLY/ASSEMBLY.) ...
Water temperature sensor removal/installation
1. Disconnect the negative battery cable.
2. Remove the dashboard. (See DASHBOARD REMOVAL/INSTALLATION.)
3. Remove in the order indicated in the table.
4. Install in the reverse order of remova ...
Other materials:
Mazda 6 Service Manual: Vinyl Upholstery Maintenance
Remove dust and dirt from the vinyl upholstery using a brush or vacuum. Remove
soiling from vinyl upholstery using a leather and vinyl upholstery cleaner.
Upholstery Maintenance
1. Clean the soiled area by lightly dabbing it with a soft cloth soaked in a
mild detergent (approx. 5%) diluted wit ...
Mazda 6 Service Manual: Split Folding
By lowering the rear seatbacks the luggage compartment space can be expanded.
WARNING
Do not drive the vehicle with occupants on folded down seatbacks or in
the luggage compartment. Putting occupants in the luggage compartment
is dangerous because seat belts cannot be fastened which coul ...