Mazda 6 Service Manual: Flywheel
FLYWHEEL INSPECTION
1. Install a dial gauge on the cylinder block.
2. Measure the flywheel runout using a dial indicator.
- If the runout is excessive, replace the flywheel.
Runout
0.1 mm {0.004 in} max.
Clutch release collar inspection
Caution
Cleaning the clutch release collar with cleaning fluids or a steam
cleaner can wash the grease out of the sealed bearing.
Turn the collar while applying force in the axial direction. ...
Manual transaxle
...
Other materials:
Mazda 6 Service Manual: Turning the Engine Off
WARNINGDo not stop the engine while the vehicle is moving: Stopping the
engine while the vehicle is moving for any reason other than in an emergency is
dangerous. Stopping the engine while the vehicle is moving will result in reduced
braking ability due to the loss of power braking, which coul ...
Mazda 6 Service Manual: Rear outer handle removal/installation
1. Remove the rear door glass.
2. Remove the rear door unit.
3. Remove the rear door latch.
4. Remove the bolts.
5. Detach the rear outer handle and rear door latch rod.
6. With the rear side of the rear outer handle fixed and the outer handle
lever pulled out (1), remove the rear side of t ...