Mazda 6 Service Manual: Foreword
Outline
- There are two on-board diagnostic functions: Operation mode, which inspects for and indicates correct operation of the input signals to the control module, and condition detection mode, which indicates troubles in the system.
- The two functions can be done using either of the following methods:
- Verifying the flashing pattern of the cruise set indicator light in the instrument cluster.
Inspection Order
Inspection of dtcs for operation mode
Note
The cruise set indicator light will illuminate for 3 seconds? when
operation mode is on.
If the cruise set indicator light does not illuminate for 3
seconds (Operation mode is not on) ...
Other materials:
Mazda 6 Service Manual: Drive shaft (mtx) disassembly/assembly
1. Disassemble in the order indicated in the table.
2. Assemble in the reverse order of disassembly.
Clip Disassembly Note
1. Mark the drive shaft and outer ring for proper assembly.
Caution
Mark with paint; do not use a punch.
2. Remove the clip.
Balls, Inner Ring, Cage Disassembl ...
Mazda 6 Service Manual: Car-navigation unit removal/installation
1. Disconnect the negative battery cable.
2. Remove the glove compartment.
3. Remove in the order indicated in the table.
4. Install in the reverse order of removal.
Car-navigation Unit Installation Note
Insert the car-navigation unit bracket into the dashboard member hole, and
with the c ...