Mazda 6 Service Manual: Front lower arm (front) inspection
1. Remove the lower arm (front) from the vehicle.
2. Inspect for damage, cracks, and bending.
3. Inspect the ball joint rotation torque.
(1) Rotate the ball joint five times.
(2) Measure the rotation torque using a suitable allen socket and a torque wrench.
- If not within the specification, replace the lower arm component.
Rotation torque
1.18-2.23 N·m
{12.1-22.7 kgf·cm, 10.5-19.7 in·lbf}
Front lower arm (front) removal/installation
1. Remove in the order indicated in the table.
2. Install in the reverse order of removal.
Front Lower Arm (Front) Ball Joint Removal Note
Separate the ball joint from the knuckle using the SST ...
Front lower arm (rear) removal/installation
1. Remove the front crossmember component. (See FRONT CROSSMEMBER
REMOVAL/INSTALLATION.)
2. Remove in the order indicated in the table.
3. Install in the reverse order of removal.
4. Inspect the ...
Other materials:
Mazda 6 Service Manual: Split Folding
By lowering the rear seatbacks the luggage compartment space can be expanded.
WARNING
Do not drive the vehicle with occupants on folded down seatbacks or in
the luggage compartment. Putting occupants in the luggage compartment
is dangerous because seat belts cannot be fastened which coul ...
Mazda 6 Service Manual: Power outside mirror inspection
1. Disconnect the power outside mirror connector.
2. Apply battery positive voltage to the power outside mirror terminals and
inspect the operation of the power outside mirror.
If not as specified, replace the power outside mirror.
3. Inspect for continuity between the power outside mi ...