Warning
1. Clamp a shock absorber on a flat surface or with the piston pointing downwards.
2. Drill a 2-3 mm {0.08-0.12 in}
hole at a point 20-30 mm {0.8-1.2 in}
from the bottom of the tube, so that the gas can escape.
3. Turn the hole downwards.
4. The oil can be collected by moving the piston rod several times up and down and cutting the tube at the end.
5. Dispose of waste oil according to the waste disposal law.
Note
Shock absorber oil is mineral oil.
Mazda 6 Service Manual: Operating Tips for MP3
MP3 stands for MPEG Audio Layer 3, which is standardized voice compression established
by the ISO*1 working group (MPEG).
Use of MP3 allows for audio data to be compressed to approximately a tenth of
the source data size.
This unit plays files with the extension (.mp3) as MP3 files.
*1 Intern ...
Mazda 6 Service Manual: Snow Tires
Use snow tires on all four wheels
Do not go faster than 120 km/h (75 mph) while driving with snow tires. Inflate
snow tires 30 kPa (0.3 kgf/cm2, 4.3 psi) more than recommended on the tire pressure
label (driver's door frame), but never more than the maximum cold-tire pressure
shown on the tir ...