Mazda 6 Owners Manual: Fuel-Filler Cap
To remove the fuel-filler cap, turn it counterclockwise.
Attach the removed cap to the inner side of the fuel lid.
To close the fuel-filler cap, turn it clockwise until a click is heard.
CAUTION
(U.S.A. and Canada)
If the check fuel cap warning light illuminates, the fuel-filler cap may not be properly installed. If the warning light illuminates, park your vehicle safely off the right-of-way, remove the fuel-filler cap and reinstall it correctly.
After the cap has been correctly installed, the fuel cap warning light may continue to illuminate until a number of driving cycles have been completed. A drive cycle consists of starting the engine (after four or more hours with the engine off) and driving the vehicle on city and highway roads.
Continuing to drive with the check fuel cap warning light illuminated could cause the check engine light to illuminate as well.
Fuel-Filler Lid
To open, pull the remote fuel-filler lid release.
To close, press the fuel-filler lid until it locks securely.
...
Steering Wheel
WARNING
Never adjust the steering wheel while the vehicle is moving: Adjusting
the steering wheel while the vehicle is moving is dangerous. Moving it can very
easily cause the driver to abruptly ...
Other materials:
Mazda 6 Owners Manual: Input/turbine speed sensor removal/installation
1. Disconnect the negative battery cable.
2. Remove the battery and battery tray.
3. Remove the air cleaner component. (See INTAKE-AIR SYSTEM
REMOVAL/INSTALLATION.)
4. Disconnect the input/turbine speed sensor connector.
5. Remove the input/turbine speed sensor.
6. Apply ATF to a new O-ring ...
Mazda 6 Owners Manual: Saving Fuel and Protection of the Environment
How you operate your Mazda determines how far it will travel on a tank of fuel.
Use these suggestions to help save fuel and reduce CO2.
Avoid long warm-ups. Once the engine runs smoothly, begin driving.
Avoid fast starts.
Drive at lower speeds.
Anticipate when to apply the brakes (avoid ...