Mazda 6 Service Manual: High-tension lead removal/installation
Caution
The high-tension leads must be reinstalled to their original position.Incorrect installation can damage the leads and cause power loss, and negatively affect the electronic components.
1. Disconnect the negative battery cable.
2. Remove the plug hole plate.
3. Remove the high-tension lead.
4. Install the high-tension lead.
Spark plug inspection
Caution
Do not inspect, adjust, or clean the plug gap with a wire brush.
Doing so can damage the platinum tip.
When cleaning a spark plug with a plug clear, clean the plug
quickly for less ...
Starting system
...
Other materials:
Mazda 6 Service Manual: Actuator cable removal
1. Remove the plug hole plate.
2. Remove the cover from the cruise actuator. (See CRUISE ACTUATOR
REMOVAL/INSTALLATION.)
3. Remove the installation nut and pull the cruise actuator toward you.
4. Move the throttle, and remove the end fitting of the actuator cable from
the throttle.
5. Sque ...
Mazda 6 Service Manual: Front door speaker removal/installation
1. Disconnect the negative battery cable.
2. Remove the front door trim.
3. Remove in the order indicated in the table.
4. Install in the reverse order of removal.
Front Door Speaker Installation Note
Attach the speaker with the wiring harness placed in the groove of the door
unit panel.
...