
This unit does not support a USB 3.0 device. In addition, other devices may not be supported depending on the model or OS version.
USB devices formatted to FAT32 are supported (USB devices formatted to other formats such as NTFS are not supported).
Playback
1. Select the
icon on the home
screen to display the Entertainment screen.
2. Select
or
to switch the USB mode. The following
icons are displayed in the lower part of the center display.


NOTE
Category list
Select the
icon to display the
following category list.
Select a desired category and item.

*1 Playlist folders of Apple devices are not supported.
*2 Apple device only
*3 USB-Sticks and USB-Androidâ„¢ device only
Example of use (to play all tracks in USB device)
(Method 1)
1. Select
to display the
category list.
2. Select
.
All the tracks in the USB device are displayed.
3. Select a desired track.
The selected track is played. All the tracks in the USB device can be played by continuing playback.
NOTE
Only the tracks in the desired category selected in Step 2 are played.
(Method 2)*1
1. Select
to display the category
list.
2. Select
.
All the folders in the USB device are displayed.
3. Select
.
All the tracks in the USB device are displayed.
4. Select a desired track.
The selected track is played. All the tracks in the USB device can be played by continuing playback.
*1 Can be operated using an Androidâ„¢ device or USB flash memory.
NOTE
Only the tracks in the desired folder selected in Step 3 are played.
How to use AUX mode
Gracenote DatabaseMazda 6 Owners Manual: Transmitter battery replacement
1. Insert a small screwdriver into the slot and gently pry open the
transmitter.
2. Press the portion of the battery indicated by A and remove the battery.
3. Install a new battery (CR2025) into the front portion of the holder with
the positive pole (+) facing up. Press on the B portion of ...
Mazda 6 Owners Manual: Intermittent rear wiper relay inspection
1. Connect the connector to the intermittent rear wiper relay.
2. Connect the negative battery cable.
3. Measure the voltage at the intermittent rear wiper relay using voltmeter.
When inspecting terminal D for continuity, disconnect the intermittent
rear wiper relay connector.
4. If the ...