Mazda 6 Service Manual: No.2 amount of air blown from vents does not change
Full-auto Air Conditioner
- When performing an asterisked (*) troubleshooting inspection, shake the wiring harness and connectors while performing the inspection to discover whether poor contact points are the cause of any intermittent malfunctions. If there is a problem, check to make sure connectors, terminals and wiring harnesses are connected correctly and undamaged.
Diagnostic procedure
No.1 insufficient air (or no air) blown from vents
Diagnostic Procedure
...
No.3 amount of air blown from vents does not change
Manual Air Conditioner
Diagnostic procedure
...
Other materials:
Mazda 6 Service Manual: Engine Coolant Temperature Gauge
Displays the engine coolant temperature. The blue gauge indicates that the engine
coolant temperature is low, and the red gauge indicates that the engine coolant
temperature is high and overheating.
CAUTION
If the high engine coolant temperature warning light (red) turns on, there
is a pos ...
Mazda 6 Service Manual: Closing the Hood
1. Check under the hood area to make certain all filler caps are in place and
all loose items (e.g. tools, oil containers, etc.) have been removed.
2. Lift the hood, grasp the padded area on the support rod, and secure the support
rod in the clip. Verify that the support rod is secured in the c ...