Mazda 6 Owners Manual: Operation of Automatic Air-conditioning
1. Press the AUTO switch. Selection of the airflow mode, air intake selector and amount of airflow will be automatically controlled.
2. Use the temperature control dial to select a desired temperature. Press the DUAL switch or turn the front passenger temperature control dial to control the set temperature individually for the driver and front passenger.
To turn off the system, press the OFF switch.
NOTE
- Setting the temperature to maximum hot or cold will not provide the desired temperature at a faster rate.
- When selecting heat, the system will restrict airflow until it has warmed to prevent cold air from blowing out of the vents.
Control Switches
AUTO switch
By pressing the AUTO switch the following functions will be automatically controlled
in accordance with the selected set temperature:
Airflow temperature
Amount of airflow
Selec ...
Windshield Defrosting and Defogging
Press the windshield defroster switch. In this position, the outside air position
is automatically selected, and the air conditioner automatically turns on. The air
conditioner will directly dehum ...
Other materials:
Mazda 6 Owners Manual: A/c unit disassembly/assembly
1. Disassemble in the order indicated in the table.
2. Assemble in the reverse order of disassembly.
Evaporator Temperature Sensor Assembly Note
Assemble the evaporator temperature sensor as shown in the figure.
Sensor Clamp Assembly Note
Attach the sensor clamp as shown in the figure ...
Mazda 6 Owners Manual: Interior Lights
NOTE
Do not leave the lights on for long periods while the engine is turned off.
Otherwise the battery power could be depleted.
Overhead Lights
NOTE
The rear map lights also turn on and off when the overhead light switch is
operated.
Front Map Lights
When the overhead light switch is i ...