Press the windshield defroster switch. In this position, the outside air position is automatically selected, and the air conditioner automatically turns on. The air conditioner will directly dehumidify the air to the front windshield and side windows.
Airflow amount will be increased.
WARNING
Set the temperature control to the hot or warm position when defogging (
position): Using the position
with the temperature control set to the cold position is dangerous as it will cause
the outside of the windshield to fog up. Your vision will be hampered, which could
lead to a serious accident.
NOTE
Use the temperature control dial to increase the air flow temperature and defog the windshield more quickly.
Mazda 6 Owners Manual: Actuator cable installation
1. Slide the lock lever in the direction shown by the arrow to unlock the
adjuster.
2. Turn the ratchet ring to release lock in the direction shown by the arrow.
3. Install the actuator cable to the cruise actuator.
Caution
Due to the possibility of actuator cable damage, make sure th ...
Mazda 6 Owners Manual: Removing a Flat Tire
1. Loosen the lug nuts by turning them counterclockwise one turn each, but do
not remove any lug nuts until the tire has been raised off the ground.
2. Place the jack on the ground.
3. Turn the jack screw in the direction shown in the figure and adjust the jack
head so that it is close to th ...