Mazda 6 Owners Manual: Outside Temperature Display
When the ignition is switched ON, the outside temperature is displayed.
NOTE
Under the following conditions, the outside temperature display may differ from the actual outside temperature depending on the surroundings and vehicle conditions:
- Significantly cold or hot temperatures.
- Sudden changes in outside temperature.
- The vehicle is parked.
- The vehicle is driven at low speeds.
Changing the Temperature Unit of the Outside Temperature Display
The outside temperature unit can be switched between Celsius and Fahrenheit using the following procedure.
Settings can be changed by operating the center display screen.
NOTE
When the temperature unit indicated in the outside temperature display is changed, the temperature unit indicated in the engine coolant gauge display changes in conjunction with it.
Fuel Gauge
The fuel gauge shows approximately how much fuel is remaining in the tank when
the ignition is switched ON. We recommend keeping the tank over 1/4 full.
If the fuel level is low, and
turn ...
Distance-to-empty
This displays the approximate distance you can travel on the remaining fuel based
on the fuel economy.
The distance-to-empty will be calculated and displayed every second.
NOTE
Even though t ...
Other materials:
Mazda 6 Owners Manual: Using LATCH Lower Anchor
Your Mazda is equipped with LATCH lower anchors for attachment of specially designed
LATCH child-restraint systems in the rear seats. Both anchors must be used, otherwise
the seat will bounce around and put the child in danger. Most LATCH child-restraint
systems must also be used in conjunctio ...
Mazda 6 Owners Manual: Dsc system inspection
Preparation
1. Verify that the battery is fully charged.
2. With ignition switch on, verify that the ABS warning light goes out after
2.4 seconds.
3. Turn the ignition switch off.
4. On level ground, jack up the vehicle and support it evenly on safety
stands.
5. Shift the transaxle to N posi ...