Warning
Wrap a thick cloth around it and slowly turn it counterclockwise to the first stop. Step back while the pressure escapes.
1. Clean the radiator cap negative pressure valve and tha sealed part.
2. Inspect the crack or turn over on sealed of the radiator cap.
3. Fill the radiator cap test adopter with the water or the engine coolant to the full level and attach the radiator cap to the adapter.
4. Hold the radiator cap downward and apply pressure gradually. Verify that the pressure become held for 10 s
within the specification.
Pressure
113-142 kPa
{ 1.1-1.4 kgf/cm2, 15-20 psi}
Mazda 6 Service Manual: Transaxle Ranges
The shift position indicator light in the instrument cluster illuminates.
The selector lever must be in P or N to operate the starter.
P (Park)
P locks the transaxle and prevents the front wheels from rotating.
WARNING
Always set the selector lever to P and set the parking brake:
Only s ...
Mazda 6 Service Manual: Foreword
When the customer reports a vehicle malfunction, check the malfunction
indicator lamp (MIL), HOLD indicator light flashing, and PCM memory for
diagnostic trouble code (DTC), then diagnose the malfunction according to
following flowchart.
- If the DTC exists, diagnose the applicable ...