Mazda 6 Owners Manual: Repairing Damage to the Finish
Deep scratches or chips on the finish should be repaired promptly. Exposed metal quickly rusts and can lead to major repairs.
CAUTION
If your Mazda is damaged and needs metal parts repaired or replaced, make sure the body shop applies anticorrosion materials to all parts, both repaired and new. This will prevent them from rusting.
Exterior Care
The paintwork on your Mazda represents the latest technical developments in composition
and methods of application.
Environmental hazards, however, can harm the paint's protective properties, if
...
Bright-Metal Maintenance
Use tar remover to remove road tar and insects. Never do this with a knife
or similar tool.
To prevent corrosion on brightmetal surfaces, apply wax or chrome preservative
and rub it to a hi ...
Other materials:
Mazda 6 Owners Manual: Supplier identification procedure
Note
When asking the supplier (service center) for repair or
replacement, verify which supplier the module belongs to and enter in the
Audio Repair Order Form.
Identification With Printed Numbers/Label
1. Remove the audio unit.
2. Verify the supplier name written on the label attached ...
Mazda 6 Owners Manual: Starting procedure for on-board diagnostic test mode
Note
All DTCs displayed in the on-board diagnostic test mode should be
entered in the Audio Repair Order Form.
1. Turn the ignition switch to the ACC or ON position.
2. First press the POWER button, then simultaneously press the AM button and
TAPE/MD button for 2 seconds or more.
N ...