Mazda 6 Service Manual: Supplier identification procedure
Note
- When asking the supplier (service center) for repair or replacement, verify which supplier the module belongs to and enter in the Audio Repair Order Form.
Identification With Printed Numbers/Label
1. Remove the audio unit.
2. Verify the supplier name written on the label attached on each module.
Identification With On-board Diagnostic Test Mode
1. Start the on-board diagnostic test mode.
2. Verify the part number and supplier code displayed in the LCD.
Note
- When no DTCs are in the memory, part numbers and supplier codes will not be displayed.
Starting procedure for on-board diagnostic test mode
Note
All DTCs displayed in the on-board diagnostic test mode should be
entered in the Audio Repair Order Form.
1. Turn the ignition switch to the ACC or ON position.
2. First press the POWE ...
Dtc clearing procedure
1. Start the on-board diagnostic test mode.
2. First press the POWER button, then simultaneously press AUDIO CONT button
for 2 seconds or more.
Caution
Before clearing the DTCs, be sure to ...
Other materials:
Mazda 6 Service Manual: Fuel injector inspection
Operation Test
Carry out the Fuel Injector Operation Inspection. (See Fuel Injector
Operation Inspection.)
If not as specified, perform the further inspection for the fuel
injectors.
Resistance Inspection
Note
Perform the following test only when directed.
1. Turn the ignition s ...
Mazda 6 Service Manual: Tires
For reasons of proper performance, safety, and better fuel economy, always maintain
recommended tire inflation pressures and stay within the recommended load limits
and weight distribution.
WARNING
Using Different Tire Types: Driving your vehicle with different types
of tires is dangerous. I ...