Mazda 6 Service Manual: Starter removal/installation
Warning
When the battery cables are connected, touching the vehicle body with starter terminal B will generate sparks. This can cause personal injury, fire, and damage to the electrical components. Always disconnect the battery negative cables before performing the following operation.
1. Disconnect the negative battery cable.
2. Remove the under cover.
3. Remove the air cleaner assembly.(See INTAKE-AIR SYSTEM REMOVAL/INSTALLATION.)
4. Remove the clutch release cylinger.(MTX) (See CLUTCH RELEASE CYLINDER REMOVAL/INSTALLATION.)
5. Remove in the order indicated in the table.
6. Install in the reverse order of removal.
Starting system
...
Starter inspection
On-vehicle Inspection
1. Verify that the battery is fully charged.
2. Crank the engine and verify that the starter rotates smoothly without any
noise.
If not, inspect the following.
- Re ...
Other materials:
Mazda 6 Service Manual: Warning Light and Brake Pad Wear Indicator
Warning Light
The warning light turns on when the system has a malfunction.
Refer to Warning Indication/Warning Lights
Brake Pad Wear Indicator
When the disc brake pads become worn, the built-in wear indicators contact the
disc plates. This causes a screeching noise to warn that the pads shoul ...
Mazda 6 Service Manual: Vehicle Loading
WARNING
Do not tow a trailer with this vehicle: Towing a trailer with this
vehicle is dangerous because it has not been designed to tow a trailer and doing
so will affect the drive system which could result in vehicle damage.
This section will guide you in the proper loading of your vehicle, t ...